Re: getch() in Python
Mon Feb 10, 2014 12:49 pm
Even until 6 months ago there were quite important modules that were available for python2 but hadn't yet been converted to work with python3 (and a similar situation applies to pypy) However I think most important things now work in python3 and there are many new modules that won't work in python2, but it takes a while for the world to migrate. For instance the python-imaging library stopped being maintained ages ago, before python3 was sorted so it you wanted to use it for image processing you had to stick to python2. However the Pillow fork of PIL has kept bug fixing and improving the module so it must be better, and it works on python3 and pypy. However on raspbian the decrepit PIL is still automatically included as the graphics module for python, and if you want to apt-get install it you need to point to the 'jessie' repository. (On Arch, interestingly python == python3 and you have to specify python2 if you want that. And you can just pacman -S python-pillow, and Ubuntu is starting to include pillow rather than PIL now I think)
Curses Programming with Python¶
|Author:||A.M. Kuchling, Eric S. Raymond|
This document describes how to write text-mode programs with Python 2.x, using the extension module to control the display.
What is curses?¶
The curses library supplies a terminal-independent screen-painting and keyboard-handling facility for text-based terminals; such terminals include VT100s, the Linux console, and the simulated terminal provided by X11 programs such as xterm and rxvt. Display terminals support various control codes to perform common operations such as moving the cursor, scrolling the screen, and erasing areas. Different terminals use widely differing codes, and often have their own minor quirks.
In a world of X displays, one might ask “why bother”? It’s true that character-cell display terminals are an obsolete technology, but there are niches in which being able to do fancy things with them are still valuable. One is on small-footprint or embedded Unixes that don’t carry an X server. Another is for tools like OS installers and kernel configurators that may have to run before X is available.
The curses library hides all the details of different terminals, and provides the programmer with an abstraction of a display, containing multiple non-overlapping windows. The contents of a window can be changed in various ways– adding text, erasing it, changing its appearance–and the curses library will automagically figure out what control codes need to be sent to the terminal to produce the right output.
The curses library was originally written for BSD Unix; the later System V versions of Unix from AT&T added many enhancements and new functions. BSD curses is no longer maintained, having been replaced by ncurses, which is an open-source implementation of the AT&T interface. If you’re using an open-source Unix such as Linux or FreeBSD, your system almost certainly uses ncurses. Since most current commercial Unix versions are based on System V code, all the functions described here will probably be available. The older versions of curses carried by some proprietary Unixes may not support everything, though.
No one has made a Windows port of the curses module. On a Windows platform, try the Console module written by Fredrik Lundh. The Console module provides cursor-addressable text output, plus full support for mouse and keyboard input, and is available from http://effbot.org/zone/console-index.htm.
The Python curses module¶
Thy Python module is a fairly simple wrapper over the C functions provided by curses; if you’re already familiar with curses programming in C, it’s really easy to transfer that knowledge to Python. The biggest difference is that the Python interface makes things simpler, by merging different C functions such as , , , into a single method. You’ll see this covered in more detail later.
This HOWTO is simply an introduction to writing text-mode programs with curses and Python. It doesn’t attempt to be a complete guide to the curses API; for that, see the Python library guide’s section on ncurses, and the C manual pages for ncurses. It will, however, give you the basic ideas.
Starting and ending a curses application¶
Before doing anything, curses must be initialized. This is done by calling the function, which will determine the terminal type, send any required setup codes to the terminal, and create various internal data structures. If successful, returns a window object representing the entire screen; this is usually called , after the name of the corresponding C variable.
Usually curses applications turn off automatic echoing of keys to the screen, in order to be able to read keys and only display them under certain circumstances. This requires calling the function.
Applications will also commonly need to react to keys instantly, without requiring the Enter key to be pressed; this is called cbreak mode, as opposed to the usual buffered input mode.
Terminals usually return special keys, such as the cursor keys or navigation keys such as Page Up and Home, as a multibyte escape sequence. While you could write your application to expect such sequences and process them accordingly, curses can do it for you, returning a special value such as . To get curses to do the job, you’ll have to enable keypad mode.
Terminating a curses application is much easier than starting one. You’ll need to call
to reverse the curses-friendly terminal settings. Then call the function to restore the terminal to its original operating mode.
A common problem when debugging a curses application is to get your terminal messed up when the application dies without restoring the terminal to its previous state. In Python this commonly happens when your code is buggy and raises an uncaught exception. Keys are no longer be echoed to the screen when you type them, for example, which makes using the shell difficult.
In Python you can avoid these complications and make debugging much easier by importing the module . It supplies a function that takes a callable. It does the initializations described above, and also initializes colors if color support is present. It then runs your provided callable and finally deinitializes appropriately. The callable is called inside a try-catch clause which catches exceptions, performs curses deinitialization, and then passes the exception upwards. Thus, your terminal won’t be left in a funny state on exception.
Windows and Pads¶
Windows are the basic abstraction in curses. A window object represents a rectangular area of the screen, and supports various methods to display text, erase it, allow the user to input strings, and so forth.
The object returned by the function is a window object that covers the entire screen. Many programs may need only this single window, but you might wish to divide the screen into smaller windows, in order to redraw or clear them separately. The function creates a new window of a given size, returning the new window object.
A word about the coordinate system used in curses: coordinates are always passed in the order y,x, and the top-left corner of a window is coordinate (0,0). This breaks a common convention for handling coordinates, where the x coordinate usually comes first. This is an unfortunate difference from most other computer applications, but it’s been part of curses since it was first written, and it’s too late to change things now.
When you call a method to display or erase text, the effect doesn’t immediately show up on the display. This is because curses was originally written with slow 300-baud terminal connections in mind; with these terminals, minimizing the time required to redraw the screen is very important. This lets curses accumulate changes to the screen, and display them in the most efficient manner. For example, if your program displays some characters in a window, and then clears the window, there’s no need to send the original characters because they’d never be visible.
Accordingly, curses requires that you explicitly tell it to redraw windows, using the method of window objects. In practice, this doesn’t really complicate programming with curses much. Most programs go into a flurry of activity, and then pause waiting for a keypress or some other action on the part of the user. All you have to do is to be sure that the screen has been redrawn before pausing to wait for user input, by simply calling or the method of some other relevant window.
A pad is a special case of a window; it can be larger than the actual display screen, and only a portion of it displayed at a time. Creating a pad simply requires the pad’s height and width, while refreshing a pad requires giving the coordinates of the on-screen area where a subsection of the pad will be displayed.
The call displays a section of the pad in the rectangle extending from coordinate (5,5) to coordinate (20,75) on the screen; the upper left corner of the displayed section is coordinate (0,0) on the pad. Beyond that difference, pads are exactly like ordinary windows and support the same methods.
If you have multiple windows and pads on screen there is a more efficient way to go, which will prevent annoying screen flicker at refresh time. Use the method of each window to update the data structure representing the desired state of the screen; then change the physical screen to match the desired state in one go with the function . The normal method calls as its last act.
From a C programmer’s point of view, curses may sometimes look like a twisty maze of functions, all subtly different. For example, displays a string at the current cursor location in the window, while moves to a given y,x coordinate first before displaying the string. is just like , but allows specifying a window to use, instead of using by default. follows similarly.
Fortunately the Python interface hides all these details; is a window object like any other, and methods like accept multiple argument forms. Usually there are four different forms.
|str or ch||Display the string str or character ch at the current position|
|str or ch, attr||Display the string str or character ch, using attribute attr at the current position|
|y, x, str or ch||Move to position y,x within the window, and display str or ch|
|y, x, str or ch, attr||Move to position y,x within the window, and display str or ch, using attribute attr|
Attributes allow displaying text in highlighted forms, such as in boldface, underline, reverse code, or in color. They’ll be explained in more detail in the next subsection.
The function takes a Python string as the value to be displayed, while the functions take a character, which can be either a Python string of length 1 or an integer. If it’s a string, you’re limited to displaying characters between 0 and 255. SVr4 curses provides constants for extension characters; these constants are integers greater than 255. For example, is a +/- symbol, and is the upper left corner of a box (handy for drawing borders).
Windows remember where the cursor was left after the last operation, so if you leave out the y,x coordinates, the string or character will be displayed wherever the last operation left off. You can also move the cursor with the method. Because some terminals always display a flashing cursor, you may want to ensure that the cursor is positioned in some location where it won’t be distracting; it can be confusing to have the cursor blinking at some apparently random location.
If your application doesn’t need a blinking cursor at all, you can call to make it invisible. Equivalently, and for compatibility with older curses versions, there’s a function. When bool is true, the curses library will attempt to suppress the flashing cursor, and you won’t need to worry about leaving it in odd locations.
Attributes and Color¶
Characters can be displayed in different ways. Status lines in a text-based application are commonly shown in reverse video; a text viewer may need to highlight certain words. curses supports this by allowing you to specify an attribute for each cell on the screen.
An attribute is a integer, each bit representing a different attribute. You can try to display text with multiple attribute bits set, but curses doesn’t guarantee that all the possible combinations are available, or that they’re all visually distinct. That depends on the ability of the terminal being used, so it’s safest to stick to the most commonly available attributes, listed here.
|Extra bright or bold text|
|Half bright text|
|The best highlighting mode available|
So, to display a reverse-video status line on the top line of the screen, you could code:
The curses library also supports color on those terminals that provide it, The most common such terminal is probably the Linux console, followed by color xterms.
To use color, you must call the function soon after calling , to initialize the default color set (the function does this automatically). Once that’s done, the function returns TRUE if the terminal in use can actually display color. (Note: curses uses the American spelling ‘color’, instead of the Canadian/British spelling ‘colour’. If you’re used to the British spelling, you’ll have to resign yourself to misspelling it for the sake of these functions.)
The curses library maintains a finite number of color pairs, containing a foreground (or text) color and a background color. You can get the attribute value corresponding to a color pair with the function; this can be bitwise-OR’ed with other attributes such as , but again, such combinations are not guaranteed to work on all terminals.
An example, which displays a line of text using color pair 1:
As I said before, a color pair consists of a foreground and background color. initializes 8 basic colors when it activates color mode. They are: 0:black, 1:red, 2:green, 3:yellow, 4:blue, 5:magenta, 6:cyan, and 7:white. The curses module defines named constants for each of these colors: , , and so forth.
The function changes the definition of color pair n, to foreground color f and background color b. Color pair 0 is hard-wired to white on black, and cannot be changed.
Let’s put all this together. To change color 1 to red text on a white background, you would call:
When you change a color pair, any text already displayed using that color pair will change to the new colors. You can also display new text in this color with:
Very fancy terminals can change the definitions of the actual colors to a given RGB value. This lets you change color 1, which is usually red, to purple or blue or any other color you like. Unfortunately, the Linux console doesn’t support this, so I’m unable to try it out, and can’t provide any examples. You can check if your terminal can do this by calling , which returns TRUE if the capability is there. If you’re lucky enough to have such a talented terminal, consult your system’s man pages for more information.
The curses library itself offers only very simple input mechanisms. Python’s support adds a text-input widget that makes up some of the lack.
The most common way to get input to a window is to use its method. pauses and waits for the user to hit a key, displaying it if has been called earlier. You can optionally specify a coordinate to which the cursor should be moved before pausing.
It’s possible to change this behavior with the method . After , for the window becomes non-blocking and returns (a value of -1) when no input is ready. There’s also a function, which can be used to (in effect) set a timer on each ; if no input becomes available within a specified delay (measured in tenths of a second), curses raises an exception.
The method returns an integer; if it’s between 0 and 255, it represents the ASCII code of the key pressed. Values greater than 255 are special keys such as Page Up, Home, or the cursor keys. You can compare the value returned to constants such as , , or . Usually the main loop of your program will look something like this:
The module supplies ASCII class membership functions that take either integer or 1-character-string arguments; these may be useful in writing more readable tests for your command interpreters. It also supplies conversion functions that take either integer or 1-character-string arguments and return the same type. For example, returns the control character corresponding to its argument.
There’s also a method to retrieve an entire string, . It isn’t used very often, because its functionality is quite limited; the only editing keys available are the backspace key and the Enter key, which terminates the string. It can optionally be limited to a fixed number of characters.
The Python module supplies something better. With it, you can turn a window into a text box that supports an Emacs-like set of keybindings. Various methods of class support editing with input validation and gathering the edit results either with or without trailing spaces. See the library documentation on for the details.
For More Information¶
This HOWTO didn’t cover some advanced topics, such as screen-scraping or capturing mouse events from an xterm instance. But the Python library page for the curses modules is now pretty complete. You should browse it next.
If you’re in doubt about the detailed behavior of any of the ncurses entry points, consult the manual pages for your curses implementation, whether it’s ncurses or a proprietary Unix vendor’s. The manual pages will document any quirks, and provide complete lists of all the functions, attributes, and characters available to you.
Because the curses API is so large, some functions aren’t supported in the Python interface, not because they’re difficult to implement, but because no one has needed them yet. Feel free to add them and then submit a patch. Also, we don’t yet have support for the menu library associated with ncurses; feel free to add that.
If you write an interesting little program, feel free to contribute it as another demo. We can always use more of them!
The ncurses FAQ: http://invisible-island.net/ncurses/ncurses.faq.html
© Copyright IronPython Team; Microsoft Corporation; Python Software Foundation. Last updated on Nov 16, 2013.Sphinx theme provided by Read the Docs